12
System Settings and Operation Tests
Depending on the application program that is active on the Optimus, there are number of settings and
options that may be selected for both setup and testing. The table shows a number of those settings
and their descriptions.
S
ETTING
D
ESCRIPTION
D
EFAULT
Clock
Set date and time for the system.
N/A
Backlight ON Period
Set the duration for the keyboard/LCD backlight
the light goes off after 20
seconds
CPU Speed
Set CPU running speed. There are five speeds available:
Full speed, half speed, quarter speed, eighth speed and
sixteenth speed.
Full speed
Powering Off the
Terminal
Set time threshold for automatically power off when no
operation is taking place during that specified period. If this
value is set to zero, this function will be disabled.
10 minutes
Power On Options
There are two possible selections:
Program Resume
, which
starts from the program being used during the last session
before the last power-off; and
Program Restart
, which starts
with a new program.
Program Resume
Key Click
Select a tone for the beeper or disable the beeper when the user
presses a key button.
Enable
System Password
Set a password to protect the user from entering the system
menu.
no password is se
t
The Optimus S has numerous tests available to the user for both operation and diagnostics.
Depending on the application program that is in the active memory will determine which tests can be
performed and are available to the user. The following table provides a description of the available
tests.
S
ETTING
D
ESCRIPTION
D
EFAULTS
Reader
To test the reading performance of the scanner. The following symbologies are enabled for
the Reader test. All other symbologies will need to be enabled via programming.
Default Barcodes: Code 39, Industrial 25, Interleave 25,Codabar, Code 93, Code 128, UPCE
UPCE with ADDON 2, UPCE with ADDON 5, EAN8, EAN8 with ADDON 2
EAN8 with ADDON 5, EAN13, EAN13 with ADDON 2, EAN13 with ADDON 5
Buzzer
To test the buzzer with different Frequency/Duration. Press
ENTER
key to start and then
press any key to stop the test.
LCD & LED
To test LCD display and LED indicator. Press
ENTER
key to start and then press any key to
stop the test.
Keyboard
To test the rubber keys. Press a key and the result will be shown on the LCD display. Note
that the
FN
key should be used in conjunction with numeral keys.
Memory
To test the data memory (SRAM). Note after the test, the contents of the memory space will
be wiped out.
Warning: This test erases any data stored in the terminal.
