Getting Started with the E Series Scanner
This quick start guide provides you with the resources to get you started on 3D scanning.
The E 3D Scanner comes with:
-
Physical capturing unit for capturing 3D data (some assembly is required)
-
Note: Users purchased either the regular E series or the E HD which has higher
megapixel cameras for more accurate data acquisition
-
Note: These systems are pre-calibrated. Tampering with the lenses, cameras, or
projector will ruin the calibration settings. The unit will need to come back to
Metron3D for a recalibration.
-
Scanning software, FlexScan3D
Assembling the Capturing Unit
Instructions for assembly can be found in this Quick Start Guide
Installation of FlexScan3D
Step by step process up through a first initial scan is outlined at the end of this Quick Start
Guide
Computer Requirements for FlexScan3D
-
Windows 7 or higher machine
-
i7 intel processor
-
16gb of Ram
-
25gb of free memory space
-
Nvidia 980 gtx graphics card or comparable or better
Customer Support
If you have any installation issues after following this guide, please contact:
Worldwide
Email:
North America
Phone: +1 434 946 9887
1
Summary of Contents for E Series
Page 1: ... Series Quick Start Guide ...
