www.metron3d.com
AttAcH tHe cAmerAS to tHe ScAnner
Attach the two cameras onto the scanner on both sides using the screws. Tighten screws until they are firm
but do not over tighten.
AttAcH tHe lenSeS to tHe cAmerAS
Carefully remove the lenses from the packaging and take the camera lens cap from each camera. The lenses
will need to be screwed onto the cameras until they are hand tight.
connect tHe HDmI AnD poWer cAbleS to tHe projector
Locate the back of your projector and attach the HDMI and power cables.
