3
4
0 208 994 11 81
INSTALLATION
3
1 - Install the batteries in the remote controllers taking care of not
inverting the polarity.
2 - Unplug all the scart leads connected to the main TV and
hook them up to the relevant socket of the transmitter. It
may happen that several devices use the same scart lead.
For example, a scart lead may run from the VCR to the SAT
receiver, and from SAT receiver to TV. In that case, leave
the first link between VCR and SAT, and plug only on the
transmitter the scart from the SAT receiver. See the paragraph
called «serial connection» for more details
3 - Connect your main TV to the transmitter thanks to the
provided scart lead.
4 - Install the transmitter as high as possible, avoiding mirrors or
metal shelves that stops the RF waves.
5 - Plug one of the AC/DC adapters to the rear of the transmitter.
Setting up the transmitter
A
