All-Engineering BV
https://metrumacoustics.com
info@metrumacoustics.com
Technical specs :
Working principle:
Non-oversampling 24 bit DAC.
Power supply:
30 VA single toroid transformer. Average power
consumption 8 Watts. On standby < 1 Watt
Power requirement:
110/115V AC or 220/230 V AC 60/50Hz
Inputs:
1x optical Toslink, 2x RCA coaxial. 1x USB module optional
Outputs:
2x RCA connectors. One headphone connector
Output voltage:
RCA: 2 Volts RMS. Headpone:2 Volts RMS
Frequency response:
1Hz -0.8dB, 20 kHz -1.5 dB 44.1kHz sampling.
1Hz -0.8dB, 65 kHz -3dB 192kHz sampling.
Distortion:
0,007 % THD
Noise floor:
-145 dB related to 2 Volt RMS
Output impedance:
100 Ohms RCA. 3 Ohms for headphone connection.
Sampling frequency:
Optical: 44 - 96 kHz sampling ,16 or 24 bits.
Coaxial: 44 - 192 kHz sampling, 16 or 24 bits.
USB: 44 -384 kHz sampling.
Dimensions WxHxD:
190 x 60 x 245 mm.
Weight:
2.5 kg.
Subject to change without notice.
All Engineering
Ambachtsweg 4K
3953BZ Maarsbergen
The Netherlands
