www.mettatec.com
Image: Plastic clip removed from the Drone arm.
8.
Carefully insert the Trigger Sensor under the motor of the Drone's left front arm.
9.
Install the GNSS antenna on the Antenna Bracket using the short connector cable
provided. Before screwing the connector to the antenna, unscrew the supplied
fixing nut and save it.
Image: Unscrewed nut before antenna installation.
10.
Firmly attach the Antenna Mount to the top of the Drone using the Velcro
provided. The correct installation position of the antenna mount is just above the
location of the Drone camera. Once placed, check that the propellers of the Drone
when turning do not touch the support: it is enough to have a safety margin of five
millimeters.
11.
Connect the antenna cable to the M2 / M + module. Be careful not to block the
view of the Drone's anti-collision system. In the case of using the long connection
cable provided by Emlid, wrap the antenna cable around the bracket and secure it
in place with a tie wrap.
Drone Configuration
1.
Turn on the Drone Phantom 4 Pro or Advance and the remote control.
2.
Enter the DJI GO 4 App and activate the front lights of the Drone arms:
Settings / MC Settings / Advanced Settings / Turn on Aircraft Arm LEDs.
