Installation on the Drone:
1.
Attach the Module into the drone’s left side leg
2.
Insert a MicroSD memory card into the
GNSS X5 Module
3.
Plug the Micro-USB cable into the USB slot of the P4P
4.
Carefully insert the Trigger Sensor under the motor of the Drone's left front arm
5.
Install the GNSS Antenna on top of the antenna mount by screwing it to the short
connector of the cable provided (unscrew the supplied
fi
xing nut and save it, in
case there is one)
Image: Unscrewed nut before Antenna installation.
6.
Firmly attach the Antenna Mount to the top of the Drone using the 3M Velcro
provided. The correct installation position of the antenna mount is just above the
location of the Drone camera. Once placed, validate that the propellers of the Drone
do not touch the support.
7.
Connect the antenna cable to the X5 GNSS module. Be careful not to block the
view of the Drone's anti-collision system
Drone
Configura
tion
1.
Turn on the Drone Phantom 4 Pro v.1/v.2 or Advance and its remote control.
2.
Enter the DJI GO 4 App and activate the front red lights of the Drone
arms: Settings / MC Settings / Advanced Settings / Turn on Aircraft Arm
LEDs.
Topographic Survey Flights
Before Flight:
1.
Program your
fl
ight mission following the instructions of the
fl
ight control application
you use: DJI GSP, Pix4D, DroneDeploy, MapsMadeEasy or others.
2.
The provided MicroSD memory card (Max. 64GB capacity) MUST BE INSERTED in
the
GNSS X5 PPK Module.
3.
Turn ON the previously installed
GNSS X5 PPK Module
by connecting the Micro-USB
cable to the Drone.
