MR-GW User Manual | EN
V 1.0 | Version 05/2020
Page 27 of 29
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | Deutschland
Tel. +49 7702 533-0 | Fax +49 7702 533-433
more Documentation: www.metz-connect.com
4.4.1
Network settings
The
Network
tab is used to configure the network settings:
Figure 26 MC-Search Utility Network settings
The new IP address is displayed in the device list after a short time. Double-clicking on the
device found
in the
selection list takes you directly to the web interface of the MR-GW. The MR-GW is then configured via the web
interface.
1
Configuring network settings manually
2
DHCP
- Obtain an IP address automatically via a DHCP server.
The prerequisite for this is that a DHCP server is available in the network!
3
Update
- the new network settings are saved and accepted in the device.