If you press the red key once, you can adjust the LNC
frequencies for vertical and horizontal polarisation
together with the
keys.
If you press the red key twice, only the LNC frequency
for vertical polarisation is selected for adjustment with
the
keys. The LNC frequencies are stored
together with the stations.
+
-
+
-
4
1. SAT Programming
LNC frequency
for 100 Hz sets
4. Set the LNC frequencies
5. Select the desired stations
(in this example: ASTRA)
6. Select the first programme
position
7. Store the stations and return
to the TV picture
6 9 6 - S 0 1 F - G B
AV
ASTRA
58 TV stations *
41 radio stations *
45 ADR stations *
22 kHz signal
LNC-Freq. H
LNC-Freq. V
Off
9,75 GHz
9,75 GHz
SAT-programming
?
MENU
return
Help
TV
TV picture
696+S01C-GB
ARD
ZDF
SAT1
RTL
BR 3
NDR3
MDR3
SWF3
WDR3
3SAT
ASTRA
ARD delete
58 TV stations *
from prog number – –
SAT-programming
?
MENU
return
Help
TV
TV picture
696+S01D-GB
ARD
ZDF
SAT1
RTL
BR 3
NDR3
MDR3
SWF3
WDR3
3SAT
ASTRA
ARD delete
58 TV stations *
from prog number 01
SAT-programming
?
MENU
return
Help
TV
TV picture
store?
OK
Before your transfer the desired group of SAT stations,
you must always set and store the required LNC
frequencies.
The first 10 program positions of the selected group of
stations are displayed in the station table.
You can now select individual stations with the
and
keys and delete them by pressing the
key.
This can be done, for example, to remove encoded
stations for which you have no decoder.
* Number of stations as in January 1997
P
-
P
+
The TV set now asks for the first program position, i.e.
the programme position at which storage of the stati-
ons is to start. Enter the desired program position with
the numerical keys. The selected stations will then be
stored continuously, starting at this program position.
In TV sets which can manage more than
200 program positions, a separate station
table (with blue header line) is generated
for SAT radio stations. This table contains
only radio stations. The function can be
cancelled at this point by pressing the
key; the stored settings are not changed.
TV
The selected stations are copied from the station table
to the programme storage.
After the transfer, you can sort the stations as described
in Section 3.1 of the Operating Instructions for the TV
set.
red
-
+
0
1
OK
If these LNC frequencies are not set, the stations
will not be stored with the correct channel num-
ber or the TV set will be tuned incorrectly if you
enter a station frequency. In such cases, no
picture will be displayed when you select the
related programme position or a station which is
stored in another programme position will appear.
TV
Press this key on the remote
control
The screen displays
Explanation
100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz
