75
17.6 Digital output
It is possible to connect an AV device to the TV using the audio outputs (see page 94)
located on the back of the TV.
Digital sound can be transmitted from the AV device using a optical audio cable connection
("Toslink" at stores specialising in accessories).
The "Digital Output" menu need only be configured if the TV uses the
AUDIO OUT DIGITAL port to the AV device, such as HiFi receiver,
wireless headphones, surround decoder, etc.
Digital output settings:
• Press
button to open the "Functional overview".
• Select "Menu" with the cursor and press the
button.
• Select "Sound" with the cursor and press the
button.
• Select "Digital output" with the cursor in the context menu and press the
button.
• Press the
button, use the cursor buttons to select the desired menu item (home
cinema, stereo, user-defined) and press the
button.
The following settings can be adjusted under the menu item "Format":
- Auto: The audio signal is output in the same format in which it is received.
In Auto mode, it is still possible to adjust the damping to compensate for the
quieter Dolby signals.
- PCM: The audio signal is output in PCM format, even if a different format is received.
• Press the
button to exit the menu.
+
EXIT
Radio
Internet inter-
Recordings archive
TV
Functional overview
20:10
Music
Photos
Videos
Analogue
Network
USB
HDMI
Filemanager
Remove USB Device
Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network
AV devices
Sound
Menu
20:10
Radio station list
TV station list
Picture
Subtitle
Service
Parental control
Recordings/EPG
Configuration
Bluetooth
®
Terrestrial
Analog-TV
Cable
Satellite
■ MANUAL
Sound
H H H
EXPERT
Sound settings, general
Programme position
BACK
Speakers
Headphone
Analogue output
Digital output
External Subwoofer
Speech Intelligibility
Automatic volume control on
Mute
Immediately
Audio Description
Device
Custom
Format
Auto
PCM Attenuation
■ MANUAL
■ OPERATION LEVEL
General
Digital output
Device
Custom
Sound
EXIT
OK
OK
OK
