19
4.6 First-Time Settings
9. Deleting a single station: select the station to be deleted with the cursor key and press the
red
key to delete it.
10. Deleting several contiguous stations: select the first station you want to delete and press the green key. Then
select the last station you want to delete and press the
yellow
key.
Press the
blue
key to delete the entire block of stations.
11. When you are finished, press the
MENU
key
to exit from the "Delete stations" window.
Changing the station names
If your TFT monitor can determine the station name from the TV signal, this name is saved at the selected pro-
gramme position. If the station name cannot be determined, the number of the programme position is saved in the
programme position (e.g. PR02).
To change the saved station names, proceed as follows:
• Use the cursor key
or
to select the menu item "Name".
• Press the cursor key
to select the first character of the name.
• Use the cursor keys
or
to scroll through the character set until the desired character appears at the selected
character position.
• Press the cursor key
to move to the next character of the name.
• Repeat the above three steps until you have entered the desired name.
Note that the name may not be longer than
five
characters.
PC mode
Selecting the signal input
• Press the
PC
key on the remote control to switch on your monitor.
• Press the
MENU
key on the remote control to open the TV menu.
The menu item "INPUTS" is coloured.
• In the sub-menu "SOURCE", select the appropriate signal input [PC (RGB) or PC (DVI)].
Summary of Contents for Flat-Cinema-TV 40 TK 81
Page 1: ...Flat Cinema TV 40 40 TK 81 Operating Instructions ...
Page 37: ...37 ...
Page 38: ...38 ...
Page 39: ...39 ...
