48
The Electronic Programme Guides are
broadcast by several different stations,
and the information is therefore presented
in various layouts. You can thus choose
between different EPGs with different
appearances.
• TV set with a single tuner: select the EPG
programme position and leave it selec-
ted for 30 minutes
• TV set with two tuners: the TV set col-
lects the EPG data with the aid of the
second tuner.
Special notes:
All stations which are found by a station
search are displayed in the station table
and also listed in the EPG. Stations which
carry two different programmes at diffe-
rent times of the day must be stored in two
programme positions (see Section 24).
You can select which stations are to be lis-
ted in the EPG.
Normally, the data for all stations are col-
lected and displayed. If you wish to exclu-
de certain stations from the EPG, proceed
as follows:
• Press the "
MENU
" key to open the TV
menu.
• Press the white key
to display the
menu station table with the active pro-
gramme position marked.
• Press the
F2
key to enable editing of the
station table.
• Press the cursor control key
to move
to the subjects list.
• Press numeric key
!
to delete the
mark (x) at the beginning of the line
"Include station in EPG".
• If you wish to exclude further stations
from the EPG, use the cursor control
keys
to select each station
and repeat the above step.
The data collection operation is inter-
rupted if:
- the Teletext function is called;
- a recording is programmed in the
menu "AV recording";
- a "timer recording” is active or will
start within one hour;
- the Teletext function "Subtitles" is acti-
vated.
If you switch the TV set to the standby
state during the data-collection opera-
tion, the green LED lights or "EPG" is
displayed to indicate that data collection
is still running.
20.2 Collecting EPG Data
Not possible with an external receiver !
