please refer to the camera's operating instructions).
Shutter speeds faster than the camera's fastest
synch speed are not set by the camera. TTL flash
exposure and TTL fill-in flash are automatically
controlled by the camera. The
“
DEP” camera mode
(depth-of-field program) is handled by the flash
control like the intelligent program P mode.
Depending upon the given camera model,
flash exposure corrections, FE flash exposure
storage and second-curtain sychronisation
(REAR) are not possible, or cannot be set,
when in full auto mode and in programmed
image control modes; please refer to the ope-
rating instructions for the given camera !
“Tv” shutter speed priority mode
(if featured on the camera)
In the
“
Tv” shutter speed priority mode any shutter
speed can be set on the camera. If the selected
shutter speed is faster than the camera's flash
synch speed, the camera will automatically change
over to the fastest possible flash synch speed
when the shutter release is touched (see Table 3 or
the camera's operating instructions). If the
selected shutter speed is slower than the camera's
flash synch speed, then this shutter speed will be
retained. Depending upon the given camera type, a
warning signal can light up in the viewfinder when
the camera's shutter speed/aperture focusing
range is exceeded; please refer to the camera's
operating instructions.
☞
10
Summary of Contents for SCA 3102 M5
