17
Installation instructions
Safety instructions
Rest the sound system on a suitable sup-
port with an absolutely even, stable sur-
face whose size and stability is suitable
for the weight of the product on a perma-
nent basis.
The tilt angle of the speakers must not
exceed 5°.
Choose a dry and clean place away
from windows with direct sunlight, heat
sources, vibrations, high air humidity
and extreme cold.
In order to prevent damage from over-
heating, an air gap of 5 cm must be
maintained between the sound system
and walls or furniture.
Make sure there is an adequate cooling
air flow if you put your device into a
built-in cabinet.
Access to the power plug must be
guaranteed at all times so that it can
be unplugged if there is any danger.
• Do not expose the sound system to
dripping or spraying water (e.g. rain).
• Do not place any breakable objects or
objects filled with water on the housing
of the sound system or in front of the
bass reflex opening. Rocking and
vibrations may lead to the object being
damaged.
• Do not put any objects or body parts
into the openings of the sound system.
Live components on the inside of the
housing may be touched and
damaged. This could lead to a short
circuit, electric shock and fire.
• Volume that is too loud, especially over
an extended period of time, can cause
hearing damage.
• Lay the power cord such that there are
no objects resting on it and so that
no-one can trip over it.
• Never touch the power cord with wet
hands.
• Switch off the unit with the power
switch before cleaning.
• The unit may only be opened and
repaired by a qualified specialist.
Attention! RISK OF FATAL INJURIES!
• Please contact your authorised dealer if
any repairs are necessary.
• Do not use force on any operating ele-
ments, connectors or cables. To setup at
another location, first remove the power
cord and then the connecting cables to
other devices. Always pull the connec-
tors and not the cables.
609 47 0045.A2 Canton D-GB 29.09.2009 13:22 Uhr Seite 17
