25
This setting is only necessary if a “Metz
Sound System LS 5.1 W” is connected. The
menu option can only be set if the Rear
speakers have been configured. See
page 7.
Set the TV set to the normal volume at which you
would like to watch TV.
Adjust the volume correction of the individual
speakers so that the same volume is heard from
all speakers.
Setting up rear speakers, left / right:
• Use the cursor control buttons and select the
“rear left” menu option or alternatively “rear
right” and the press the
OK
button.
• Use the
– +
button to set the test sound to “On”.
The duration of the test
sound is approx. 20 sec.
After switching to another
loudspeaker the test sound
has to be turned on again.
• Use the cursor control
buttons
and select the
"Distance to listening posi-
tion" menu option.
• Use the
– +
button to set the
value for the distance.
• Use the cursor control but-
tons
to select the “Volume
correction” menu option.
• A volume correction can be entered with the
– +
button if necessary.
• Use the cursor control buttons to select “Test
sound” and then set the test sound to “Off”
again with the
– +
button.
• Press the
OK
button to save the new settings.
• Clear the “TV menu” with the
EXIT
button.
☞
Setting up the sound system
Rear speakers, left/right setup
MENU
OK
EXIT
Opening the menu
Testtone
off
Distance to hear position 1.2m
Volume correction
-4
Configuration
rear left
rear right
front right
front left
Subwoofer
Settings audio
Soundsystem
Picture profile adjust.
2)
Sound settings, gen.
Pict.set.,prog.posn.
Picture settings, gen.
Picture-Volume
Change with
Accept value with
– +
OK
2) Only for devices that are
equipped with this function.
609 47 0045.A2 Canton D-GB 29.09.2009 13:22 Uhr Seite 25
