8
Tuning your video recorder to the television
If you already set the language and country set, you can see the followings.
1
Press
on your remote control.
If you do not see this picture, check that the video is
connected properly.
Press
OK
for ‘Auto Set’ or ‘Auto Search’.
Unless you are living in an area with poor reception, ‘Auto Set’ or
‘ Auto Search’ tunes in all the stations you can receive in your
country and sorts them in a common order, for example, ARD on
programme 1, ZDF on programme 2 and so on.
See page 12 and page 13 if you need to change any of the
automatic settings. You should finish the auto set before you go
to page 12 or page 13.
The clock is also set automatically. If the clock has not
been set, the clock setting screen will appear.
Please see “ Setting time and date” on page 9.
If you want to change the station names, see page 12.
If you want to change the programme locations see page
13. You need to change programme locations if the
stations are not in order, for example, ARD on programme
1, ZDF on programme 2 and so on.
Press
MENU
to end.
MANUAL SET
PR01 P-01
PR08 P-08
PR02 P-02
PR09 P-09
PR03 P-03
PR10 P-10
PR04 P-04
PR11 P-11
PR05 P-05
PR12 P-12
PR06 P-06
PR13 P-13
PR07 P-07
PR14 ----
PR+/-:SELECT
OK:CONFIRM MENU:END
2
Important : If you switch the video off at the mains supply overnight, you do not have to retune the
video. Simply press
and then MENU on the remote control to restore all the programme
settings See page 9 to set the time and date.
MENU:END
PLEASE WAIT...
CH 25
METZ_GB(T50)
2005.6.21
3:54
PM
˘
`
8
