MEV™ Daytona™ OWNERS MANUAL
12
To prevent the cart from rolling, this brake should be applied whenever the cart is parked or left
unattended.
If the Parking Brake is engaged while the key switch is in the on position, a red (P) light will
illuminate on the display, indicating the parking brake is engaged.
The FWD – REV switch should be placed in the park position (middle) and the parking brake
applied with the key removed whenever the operator exits the cart.
Brake Pedal
The brake pedal is the larger foot pedal to the left of the accelerator pedal. The brake pedal
engages the rear drum brakes. To slow the cart down, the operator should depress the brake
pedal.
Accelerator Pedal
The accelerator pedal is the smaller pedal to the right of the brake pedal. When depressed, the
accelerator pedal will engage the drive motor in the direction the drive stick is set in the ‘FWD’
or ‘REV’ position.
The cart will accelerate up to its top speed, at which time power will be reduced to the motor.
When the reverse position is selected, cart speed is reduced.
Smooth, slow acceleration will substantially increase the cart range.
Always remember to disengage the parking brake prior to operating the cart.
Power Outlet
You will find the power outlet on the main dash area to the right of the key switch; the power
output is DC12V and rated for a Maximum Amp draw of 5A.
WARNING
