background image

2

Dear Customer,

Thank you for purchasing a Prestige Ceramic Hob.

The safety precautions and recommendations in these

instructions are for your own safety and that of others.
They will also provide a means by which to make full
use of the features offered by your appliance.

Please keep this booklet in a safe place. It may be

useful in future, either to yourself or to others in the
event that doubts should arise relating to its operation.

This appliance must be used only for its intended

purpose, that is for the domestic cooking of foodstuffs.
Any other form of usage is to be considered as
inappropriate and therefore dangerous.

The manufacturer declines all responsibility in the

event of damage caused by improper or incorrect use of
the appliance.

CE

Declaration of conformity 

This hob is intended to come into contact with food products and conforms with
European Directive 89/109/EEC.

This hob has been designed for use only as a cooking appliance. Any other use (e.g.
heating rooms) should be considered incorrect and therefore dangerous.

This hob has been designed, constructed and put on to the market in conformity with:

- Safety requirements of the "Low Voltage" Directive 73/23/EEC;
- Protection requirements of the "EMC" Directive 89/336/EEC;
- Requirements of Directive 93/68/EEC.

Summary of Contents for Prestige PR60HOBE





















Reviews: