1-800-325-9103
PB-RT-REAR
- 19 -
www.meyermfg.com
6.0 PRE-OPERATION
6.1 STATIC INSPECTION
Before operating the forage box for the first time and each time thereafter, check the following items:
1.
Check that all safety signs are in good and legible condition.
2.
Inspect the forage box for proper adjustments. (See 8.2 ADJUSTMENTS on page 33.)
3.
Lubricate the equipment. (See 8.1 LUBRICATION on page 31.)
4.
Make sure that all guards and shields are in place, secured and functioning as designed.
5.
Check condition of all hydraulic components for leaks. Repair or replace as required.
6.
Check the gear box oil level. (See 8.1 LUBRICATION).
7.
Inspect the condition of safety lighting. Repair or replace as required.
8.
Check to see that no obstructions are present in the forage box. Be sure that there are no tools laying on or in the
forage box.
9.
Verify that all electrical and hydraulic connections are tight and secure before operating.
10. Verify that all electrical and hydraulic connections are tight and secure before operating.
11. Watch for any worn or cracked welds. If found, have qualified personnel repair immediately, replacement is necessary.
12. Check all bearings for wear. Replace as needed.
DO NOT allow anyone to operate, service, inspect or otherwise
handle this forage box until all operators have read and understand
all of the instructional materials in this Operator’s And Parts Manual
and have been properly trained in its intended usage.
Verify that the forage box is securely fastened to the tractor / truck.
Verify that all electrical / hydraulic connections and bolts / hardware
are tight and securely fastened before operating the forage box.
Always keep all shields and guards in place and securely fastened.
Keep hands, feet and clothing away.
Wear safety glasses to prevent eye injury when any of the following
conditions exist:
•
When fluids are under pressure.
•
Flying debris or loose material is present.
•
Tools are being used.
Hydraulic fluid escaping under pressure can have sufficient force to
cause injury. Keep all hoses and connections in good serviceable
condition. Failure to heed could result in serious personal injury or
death.
Summary of Contents for RT 2016 Series
