1-800-325-9103
PB-RT-REAR
- 29 -
www.meyermfg.com
7.4 UNHOOKING THE TRACTOR
1.
Park the implement on level ground. Put the tractor controls in neutral, set the parking brake, and turn the engine off
before dismounting.
2.
Place wheel chocks in front and in back of the implement wheels on opposite sides to prevent the implement from
rolling after the tractor is unhooked.
3.
Remove the hydraulic hose ends from the tractor hydraulic ports and secure the hose ends on the front of the box to
keep them clean.
4.
Remove the light cords and any optional equipment connections.
5.
Trailer Mounted Units: Remove the jack from the storage mount and install it on the hitch tongue. Crank the jack down
until the hitch lifts off the tractor draw bar.
6.
Remove the hitch pin.
7.
Unhook safety chain from tractor drawbar and intermediate support.
8.
Slowly drive the tractor away from the implement.
If the forage box becomes clogged, shut off all power to the forage
box and wait until all rotating components are completely stopped.
(See 5.3 SHUTOFF & LOCKOUT POWER on page 18.)
If any component fails, shut off all power to the forage box and move
the forage box to a safe work area. Repair or replace damaged
components before proceeding with unloading of the forage.
Keep hands, legs and feet from under tongue and hitch until jack is
locked into place.
Summary of Contents for RT 2016 Series
