1-800-325-9103
PB-RT-REAR
- 37 -
www.meyermfg.com
9.0 PARTS REPAIR AND REPLACEMENT
9.1 REPLACEMENT PARTS
At times, parts on this implement will become worn or damaged. Performing repairs on this implement can pose a risk of
injury including death. To reduce risk, the party that will be doing the repair should be very knowledgeable of the
implement and the equipment that they will be using to do the repair.
•
Review the repair so that a plan can be put together and the proper equipment can be used to repair this implement
safely and correctly.
•
Personal safety equipment may include items such as safety glasses, protective footwear, hearing protection, gloves,
fire retardant clothes, etc.
•
The use of hoists and/or supports may be needed to handle heavy components.
•
If the implement is being repaired in the field, make sure the parking brake of the tractor is engaged, the implement is
on solid and level ground.
•
Welding and torching should be done by properly trained individuals who have proven their skills.
NOTE: Be environmentally friendly and dispose of any waste materials properly. Recycle when appropriate.
Inspect the axles, o-beams, spindles, tires, hitches and all safety
shielding, safety signs and safety lighting regularly. These parts if not
watched closely, could pose potential injury or death. If any part is
found in need of repair, follow the SHUTOFF & LOCKOUT POWER
recommendations and have qualified personnel repair immediately.
Shutoff and lockout power before performing machine service,
adjusting, maintaining, or clearing an obstruction from this machine.
Refer to section 5.3 SHUTOFF & LOCKOUT POWER.
Before servicing this equipment, ensure that all personnel, including
family members are familiar with the equipment and the safety
hazards that are present, along with the safety practices that should
be observed while working in this equipment.
It is important that everyone who works on this equipment is properly
trained to help ensure that they are familiar with this procedure and
that they follow the steps outlined above. This manual will remind you
when to Shutoff & Lockout Power.
Crushing Hazard
Do Not work under suspended or blocked parts.
Call the factory for any additional details you may need to perform
the repair. Some parts may come with instruction sheets to assist in
the repair. Instruction sheets may be provided with your parts order.
Otherwise, if available, instruction sheets can be e-mailed or faxed
for your convenience. Call Meyer Manufacturing Corporation toll free
at 1-800-325-9103 or email parts@meyermfg.com.
Summary of Contents for RT 2016 Series
