5
Joining the top part
and bottom frame:
Place the top part in the tubes on the
bottom frame. Remember to position
the top part so that the handlebar
points in the direction of the
swivelling front wheels.
Spring loading
The two springs inside the tubes can
be changed to obtain harder or softer
suspension. As a guideline, the
springs should be fully compressed
by the body weight of the user. There
are seven different spring hardness
levels corresponding to the following
body weight:
Mini:
: :
Orange springs for 10 -15 kg.
: :
Purple springs for 15 - 20 kg.
Mini and Small:
: :
White springs for 20 - 50 kg.
Small, Medium and Large:
: :
Yellow springs for 45 - 65 kg.
: :
Blue springs for 65 - 80 kg.
Medium and Large:
: :
Red springs for 80 - 100 kg.
: :
Silver springs for 100 - 130 kg.
The springs can easily be
interchanged. Grab and open the
swing bar so that the frame is
lowered. The tube ends are closed
with a lid - open the lids to remove
the springs. To open the lid push up
and turn clockwise before pulling the
lid down and off. After removal of the
old springs the new ones can be
inserted into the tubes. Now the lid
can be fastened again by repeating
the steps above in reverse order.
On the Model Mini, you have to lift
the top part, then you can easily
change the springs.
