6
Adjustments — step by step
It is always a good idea to consult
one of our professionals before
adjustment of Meywalk® 4.
Stanchions
Warning! Do not carry out this
adjustment while a user is placed in
Meywalk® 4.
The height of Meywalk® 4 is adjusted
by way of the black spanner grips.
Loosen the spanner grips on both
sides and adjust the frame to the
desired height. Fasten the spanner
grips firmly. It is important that both
sides are adjusted to an equal height.
You can check this by way of the
indentations on the tubes.
Handlebar
The angle of the handlebar can be
adjusted in three steps. Loosen the
two thumb screws and turn the
handlebar to the desired position.
Fasten the thumb screws lightly. If
the handlebar is seated correctly it
should not be possible to turn it with
the thumb screws lightly fastened.
When you have made sure that the
handlebar is placed correctly you
may tightly fasten the thumb screws.
