12
HANDLING OF THE
SCOOTER
Securing the Scooter
The Scooter is to be secured as follows to
prevent it from rolling off unintentionally:
1. Slide the selection lever for drive-/push
mode toward the back into drive mode.
2. Pull out the drive key.
Functional checks
The functions and safety of the Scooter
must be checked before the start of each
journey.
Driving
You determine the speed and driving di-
rection yourself when driving through the
movement of the driving actuator and the
maximum top speed setting of your scoot-
er.
BRAKES
Brake the Scooter down carefully and in
time. This is especially the case when driv-
ing in front of people and while driving
downhill!
Service brake
The motor works electrically as an operat-
ing brake and decelerates the scooter softly
and jerk-free to a standstill.
Braking down the Scooter
For allotted braking of the scooter slowly
guide the driving actuator back to the cen-
tre position (zero-setting).
☞
The scooter stops after a shortest dis-
tance after releasing the driving actu-
ator.
Braking distance
In delivery condition the braking distance
is according to the maximum values of EN
12184:
–
1.0 m with 6 km/h.
The braking distance may get longer de-
pending on the road conditions or the con-
dition of the tyres.
Parking brake
The parking brakes are only effective when
the selection lever drive-/push mode is set
to drive mode. They disengage automatical-
ly when the wheelchair starts off.
The parking brakes are manually disen-
gaged by switching the selection lever
drive-/push mode to push mode.
Summary of Contents for 1.254
Page 1: ...en Operating manual W e m o v e p e o p l e Scooter Model 1 254...
Page 50: ...50 NOTES...
Page 51: ...51 NOTES...