63
020
021
022
SPECIAL FEATURES OF
CHAMPI, MODEL 1.594-
603
Adjustment of seat width
The seat width is adjustable through
even adjustment of the arm supports
after loosening the respective clamp-
ing screw (fig. 020/
À
).
+
Note:
Maximally push the arm support
outward up to the marker.
the adjustment the respective clamp-
ing screw
À
is to be retightened.
LEG SUPPORT
Adjust to length of lower leg.
After disassembly of the screwed con-
nections on both sides (fig. 021/
Á
) the
footboard can be repositioned accord-
ingly in the holes. After repositioning
the screwed connections on both sides
are to be reassembled.
Adjusting the footplate angle
Loosen the clamping screws (fig. 022/
Â
) and adjust the angle of the foot-
board accordingly. Afterwards retight-
en the clamping screws.
1
2
3
