17
7
8
SWITCHING THE OPERAT-
ING MODULE ON
Press the ON/OFF-key on the key field
of the control panel (fig. 7). (Observe
the brochure < operating modules >).
+
Note:
Only transfer to and from the
wheelchair when the wheelchair is
switched off and the brake release
lever has been placed into the for-
ward position!
Inadvertently knocking the con-
trol lever will set the wheelchair in
motion without control! Danger
of accidents!
Only actuate the joystick (A, fig. 8)
after the self-test of the electron-
ics has been completed!
Check before drive start:
the battery charge level and
the pre-selected top speed setting.
(see the brochure < Operating
modules Pre-operation checks >).
A
