33
ADJUSTING THE SEAT
DEPTH
The seat depth can be adjusted from
39-48 cm.
+
Note:
Switch off the wheelchair. Move
the brake release lever into the
drive position. This prevents
the wheelchair from rolling away
accidentally.
+
To remove the seat cushion observe
the chapter < Removing the seat
cushion >!
Loosen screwed connections (A,
fig. 24.1) on both sides.
Adjust the back support equally to
the desired depth.
Retighten the screws (A, fig. 24.1)
on both sides.
+
Note:
With additional refitting of the
screwed connections (A, fig. 24.1)
into another hole (B, fig. 24.1) a
maximum seat depth adjustment
of 39-48 cm is possible.
!
Caution:
After the adjustment check to en-
sure that the back is secure!
24.1
B
A
