36
Rising aid
Only in combination with Champ,
model 1.594 and model 1.594-27.
The rising aid is achieved by a nega-
tive seat inclination setting to max. 10°
and therefore makes transfer out of /
into the wheelchair easier.
!
Attention:
For transfer out of / into the wheel-
chair the leg supports must lie on
the driving surface (fig. 27.2).
Switch off the operating module
before transfer out of / into the
wheelchair. Danger of accidents
by accidentally moving the joystick.
With activated rising aid do not
conduct and driving or pushing
motions.
+
Note:
On long shank lengths the steer-
ing wheels of the wheelchair can
lift at the front after activating the
rising aid.
A wheelchair therefore lifted in
the front will not be affected in its
driving safety.
27.2
