42
34.1
Closing the seatbelt
Pull both belt halves to the front and
slide the catch halves together so
that they latch together (fig. 34.1).
Then carry out a pull test.
!
Caution:
Make sure that no objects are
trapped between belt and the
body! Thus you avoid painful
pressure points
Opening the seatbelt
To open the seatbelt press the red
unlocking button inside the buck-
le, (fig. 34.1/
À
).
Adjustment of belt length
+
Note:
The lap seatbelt should not be too
tight.
Depending on the version hold the
buckle or the latch (fig. 34.1/
Á
) at
a right angle to the strap.
Push or pull the strap in the respec-
tive direction in order to extend or
shorten the strap.
Absorb excessive strap by reposi-
tioning the plastic slider (fig. 34.1/
Â
).
2
1
3
