51
Transport security
Carry out the following steps when
the wheelchair is located in the trans-
port vehicle:
Switch off the wheelchair.
Put the operating module in a safe
place or replace it on the wheel-
chair.
Stow all disassembled wheelchair
parts in a secure and protected
way.
Secure the wheelchair by way of
elasticated straps.
Push the brake release lever for-
ward as far as it will go.
Only fasten the elasticated belts to
parts of the car envisaged for this pur-
pose and to the frame tubes of the
wheelchair!
Only fasten the elasticised straps on
parts of the car designated for this
purpose as well as frame tubes (fig.
37.1 + 37.2) of the wheelchair!
s
Do not use the arm supports, leg
supports or the push bar for lash-
ing the wheelchair. Only use per-
mitted fastening material.
37.1
37.2
