58
004
005
SPECIAL FEATURES OF
CHAMPI, MODEL 1.594-
603
ADJUSTMENTS
Adjusting the back support
angle
The back support can be inclined up
to 45° by turning the handwheel (fig.
004/
À
) anticlockwise.
To raise the back support the hand
wheel (fig. 004/
À
) is to be turned
clockwise.
Adjusting the headrest height
Therefore unscrew the attachment
screw (fig. 005/
Á
).
After repositioning the head support
the attachment screw (fig. 005/
Á
) is
to be screwed back into place.
Adjusting the angle of the head
support
Loosen the clamping screw connec-
tions (fig. 006/
Â
) and readjust the
angle of the head support. After the
adjustment the clamping screws (fig.
006/
Â
) are to be retightened.
1
2
006
3
