66
SERVICE
MAINTENANCE
Like any other technical product, your
wheelchair also requires maintenance.
The following maintenance instruc-
tions describe in table form the work
that has to be carried out so that you
can enjoy the benefits of your wheel-
chair (e.g. road/operating safety and
high kilometric performance) even
after lengthy use.
+
Note:
Do not clean the wheelchair using
a high-pressure cleaner. Danger
of short circuit!
+
Water jets can cause damage to the
electronics and the operating mod-
ule.
CARE
Upholstery and covers
Clean the upholstery and covers with
warm water. In the case of stubborn
soiling, the fabric can be washed with
a commercially available washing
powder for delicate fabrics. Spots can
be removed with a sponge or a soft
brush.
+
Note:
Do not use aggressive cleaning
agents e.g. solvents, or hard brush-
es etc.
Rinse with clear water and allow to
dry.
Plastic parts
The plastic panels and parts are made
of high-quality plastic. Take care of
these by means of standard plastics
cleaning agents. Always observe the
specific product information.
Finish
The high quality finish ensures an op-
timum of protection against corro-
sion. If the surface finish is damaged
by scratches or similar, touch it up with
a varnish pen available from us. Occa-
sional application of a light cover of
oil to all moving parts (see also Main-
tenance Instructions) will ensure that
your wheelchair will give you many
years of service.
