76
51.6
51.7
51.8
CAN-Bus-version:
Depending on equipment continue
with the respective position as follows
on wheelchairs with the CAN-bus op-
erating module (fig. 51.5).
8. Open the velcro fastener of the
spanning belt.
9. Lift off the battery cover (fig. 51.6).
10.Remove the wing nuts (A, fig.
51.6).
11.Swivel the plate with the CAN-bus
controller forward and up (fig.
51.7). Secure the plate against
unintentional swivelling.
+
When swivelling the plate up pay
attention to the attachment of the
horn (fig. 51.8).
+
Continue with section < Battery
removal >.
51.5
A
A
