1
2
3
3
4
24
Swivelling the operating module
Do not grab into the area of the cross
brace. – Danger of squashing!
With the optional swivel away operating
module adapter [1] the operating module
can be swivelled back to the side (2) so that
it is located parallel to the arm support. This
makes it possible, for example:
–
to drive closer to a table,
–
remove the operating module more
easily.
For regular drive mode the operating mod-
ule can be swivelled back toward the front
until it engages back into the magnetic lock
[1].
☞
The power of the magnets (3) can be
reduced, for example with tape on top
of the magnets, for easier swivelling of
the operating module.
☞
Should the operating module be po-
sitioned too close to the arm support,
move it forward before swivelling.
Height adjustment of the operating
module
Loosen the clamping screw (4) to adjust the
height of the operating module.
☞
After the adjustment retighten the
clamping screw.
Summary of Contents for 1.610 MC1
Page 87: ...87 NOTES...
