1
2
3
8
4
5
6
7
41
Manually adjusting the seat angle
(only with model 1.613)
To adjust the manual seat inclination, open
the folding plug (3) and insert it into a differ-
ent hole (5)–(8) of the adjustment tube (4).
☞
After repositioning the folding plug,
make sure that it is closed correctly.
Electrically adjusting the seat angle
The seat inclination [1] is administrated
through the operating module or a sepa-
rate adjustment module.
☞
Therefore observe operation manual
<
Operating module
>.
Rising aid
Before using the rising aid, secure the
electric wheelchair and fold up the foot-
plates.
☞
The seat is angled forward for the stand-up
aid [2] (negative seat inclination).
☞
The negative seat angle setting serves
as support for getting up when the
electric wheelchair is standing.
☞
When tilting the seat surface forward
(rising aid) the steering wheels must
face toward the back or one side, be-
cause otherwise the footplates will hit
against the steering wheels.
☞
Adjustment of a negative seat inclina-
tion may lead to contact of the lower
leg supports with the ground and to a
lifting on the steering wheels.
Summary of Contents for 1.610 MC1
Page 87: ...87 NOTES...
