59
wheelchair cannot slide away in case
of an accident or sudden braking ma-
noeuvre.
–
Additionally activate the parking brakes.
Driving on public highways
Observe the valid regulations for public traf-
fic of your country and if necessary ask your
specialist dealer for required accessories.
Your electric wheelchair can optionally be
fit with lighting equipment. The lighting
equipment consists of::
– Headlights
– Rear reflectors.
With limited visibility and especially in the
dark we recommend to mount active light-
ing equipment and to turn it on in order to
see better and be seen.
☞
When participating in public traffic the
user is responsible or the functional-
and operationally safe condition of the
electric wheelchair.
☞
The valid traffic regulations must be ob-
served and abided when participating
in public traffic.
☞
Wear light-coloured and conspicuous
clothing when driving in darkness.
☞
When driving in the dark avoid using
the road or bicycle lanes.
☞
Observe that the lighting equipment
is not covered by clothes or any other
objects attached to the electric wheel-
chair.
☞
In case of physical limitation, such as
blindness, a driving ability certifications
for independent driving of the electric
wheelchair is required.
Cleaning
The plastic panelling is attacked through
non-ionic tensides as well as solvents and
especially alcohol.
Do not clean the electric wheelchair with
a high-pressure cleaner! – Danger of short
circuit!
The cushions and covers are normally fit
with care instructions (instruction for care).
☞
For this observe chapter
symbols on the washing instruction
In all other cases the following information
is true:
☞
Clean the upholstery with warm water
and hand washing liquid.
☞
Remove spots with a sponge or a soft
brush.
☞
Wash off persistent dirt with commer-
cial fine detergent.
☞
Do not soak! Do not machine wash!
Follow-up with clean water and allow to dry.
The chassis and wheels can be cleaned
damp with a mild detergent. Afterwards dry
off well.
☞
Check the chassis for corrosion damag-
es as well as other damages.
☞
Only clean the plastic parts with warm
water and neutral detergent or soft
soap.
☞
When using commercial plastic cleans-
ers the manufacturers application in-
structions are to be observed.
Keep the lighting components clean at all
times and check for correct functioning be-
fore each journey.
☞
Keep water and moisture away from
electrical components and cabling!
Summary of Contents for 1.610 MC1
Page 87: ...87 NOTES...
