1
37
RETAINING STRAP
Make sure that no objects are trapped
between belt and the body! – Thus you
avoid painful pressure points.
The retrospective assembly of a retaining
strap is only to be carried out by a special-
ist workshop!
The retaining strap is not part of the re-
taining system for the electric wheelchair
and/or the driver during transport in mo-
tor vehicles.
The retaining strap [1] is screwed onto both
back support tubes.
The retaining strap serves to stabilise the
sitting position and prevents falling forward
out of the electric wheelchair.
To fasten the retaining strap, pull both ends
forward and audibly let the buckle click into
place.
To open the retaining strap, press down the
release button and pull the two ends of the
strap apart.
☞
The retaining straps can be adjusted in
length and should not be pulled too
tight.
