6
2
5
3
1
4
30
Back support, mechanically ad-
justable
Removing the back support upholstery
1. For removal, first pull off the rear part of
the back support cushion (1) and fold it
over to the front [2].
2. Pull the back support flap (3) off and
guide it to the front.
3. Pull the back support upholstery from
the adjustable back (4) [5].
Placing the back support upholstery
1. For reattaching, place the back support
upholstery (1), flush with the upper
edge of the back tubes, centered to the
adjustable back (4) and fasten with the
velcro strap [2].
2. Guide the back support flap towards
the back, fold it over toward the top
and attach with the velcro strap (3).
3. Finally fold the rear part of the back
support upholstery (1) toward the back
and fasten with the velcro strap [6].
☞
For a soft upper edge you should
leave a little space between the up-
per spanning belt and the folded
back support upholstery (1).
☞
The pressure of the back must be spread
evenly throughout the back cover.
☞
A complete hand should fit in between
the cushion and back of the user at the
upper edge of the back support uphol-
stery.
