1
34
Height adjustment of the head
support for round tube back
supports
The maximum height adjustment is indi-
cated by the marking!
The head support can be detached or ad-
justed in height after the clamping lever (1)
has been slackened.
Adjusting the head support dur-
ing handicapped transport inside
a motor vehicle
The head support is approved for people
transport inside a motor vehicle.
A correctly adjusted head support reduc-
es the risk of whiplash injury during a rear-
end collision.
If the application of a firmly installed head
support in the motor vehicle is not possible,
the following settings need to be observed:
–
The head support must be adjusted in
such a fashion that the space between
the back of the head and support sur-
face is only enough to fit maximum one
flat hand.
–
The upper edge of the head support
should be adjusted slightly above or at
least level with the top of the head.
