3
3
2
1
38
SHOULDER STRAP
The shoulder strap is not part of the re-
taining system for the wheelchair and/or
user during transport in a motor vehicle.
The shoulder strap (1) serves for additional
fixation of a person sitting the wheelchair.
–
Additional stabilisation of the sitting
position.
–
Prevents falling forward.
–
Continuous adjustment to suit the us-
er’s needs.
The shoulder strap is screwed on, from the
outer side, at the respective back support
holder.
Fastening the shoulder strap
Make sure that no objects are trapped
between belt and the body! – Thus you
avoid painful pressure points.
Pull both belt halves to the front and slide
the catch halves together so that they latch
together. Then carry out a pull test.
To open the shoulder strap the red locking
button (2) is pressed down.
Adjustment of belt length
☞
The shoulder strap should not be
pulled too tight.
To adjust the length hold the respective
strap buckle (3) at a right angle to the strap
and position it accordingly.
