27
TECHNICAL DATA
All information contained in the table 1 per-
tain to the standard model.
– Seat width 40
– Seat height 51 cm
– Backrest height 42 cm
– Depth of seat 43 cm
– Front position of the driving wheel
– Wheel size 24"
– Handrim distance 15 mm
The overall length depends on the position
and size of the driving wheels.
Dimensional tolerance is ± 1.5 cm.
Tyre filling pressure:
The following pressure values can be taken
as standard values:
Steering wheel:
Standard Code 481 = 2.5 bar (36 psi)
Driving wheel:
Standard Code 486 = 4.0 bar (58 psi)
Always observe the maximum tyre fill pressure
indicated on the tyre cover!
Temperature range
Operating temperature:
- 25°C to + 50°C
Storage temperature:
- 40°C bis + 65°C
* = Attention!
The maximum admissible passenger weight
reduces in accordance with the number of
additional mounted parts and possible lug-
gage.
The admissible passenger (person)
weight is calculated on the basis
of:
maximum passenger weight (Table 1)
– actual weight
= admissible weight for luggage or mount-
ed parts.
I.e., the passenger and luggage may not
weigh more than the specified maximum pas-
senger weight of 120 kg.
If the actual weight of the passenger exceeds
the calculated maximum user (person)
weight, reduce the weight of additional
mounted parts and luggage.
If this is not possible, a more stable version
or another wheelchair model must be used.
Contact your MEYRA specialist dealer in this
respect.
** = Attention!
The continuous foot board code 54 or code
87 must be used for safety reasons when the
loading is 100 kg or greater.
Summary of Contents for 1.835
Page 29: ...29 NOTES...
