15
PUSH HANDLES
Push handles with clamping device
The push handles are attached to the back-
rest with a clamping device on each side
(fig. 8), continuously adjustable by about 30
cm, can be swivelled in 30° steps and se-
cured against being pulled out.
Benefits:
– Ideal adaptation to the requirements of the
helper through progressive height adjust-
ment and lateral adjustment.
– Stable position of the push handles due to
swivel-proof profile tubes.
– Simple handling due to the sturdy and ro-
bust hand wheels.
– Height limit stop in the form of a spring
button. – Prevents the accidental pulling
out of the handles.
Handling:
– Hold onto the push handle that is to be
adjusted with one hand.
– Loosen the clamping screw with the hand
wheel or clamping lever (A, fig. 8.1) as
much as possible until you can adjust the
push handle into the position you desire.
– To remove or insert the push handles, push
down the spring button (B, fig. 8.2).
– Retighten the clamping screws with the
hand wheel or clamping level (A, fig. 8.1).
8
8.1
B
8.2
A
Summary of Contents for 1.835
Page 29: ...29 NOTES...
