49
DIN norms and guidelines
The torque according to DIN for screwed connections can
be extracted from the table at the side.
Tyres
Filling pressure front: ..................min. 2.5 / max. 3.5 bar (35 psi)
Filling pressure rear: .....................min. 2.5 / max. 3.5 bar (35 psi)
Minimal profile depth acc. to STVO: ................................... 1.5 mm
Items with order number
Loctite 243 (medium hard) ............................................205 638 800
Maintenance checklist of the annual maintenance jobs
Tyres and rims
❑
Tread pattern depth of the tyres is greater than 1.5 mm?
❑
Tyres free of damages or foreign bodies and not brittle?
❑
Pressure front and rear?
❑
Hubs do not show tears or raptures?
❑
Hubs without axial run out of more than 2 mm?
❑
Wheel attachment screws tightened with the value indicated in the table?
❑
Inspection certificate filled out in the operating manual.
Torque according to DIN for screwed
connections
Thread diameter
Tightening torque
M
4
3 Nm
M
5
5 Nm
M
6
10 Nm
M
8
25 Nm
M 10
50 Nm
M 12
85 Nm
W e m o v e p e o p l e .
Summary of Contents for 2.322
Page 8: ...8 OVERVIEW Model 2 322 R Net operating module ...
Page 51: ...51 NOTES ...
