2
2
6
1
3
4
5
10
ASSEMBLY
The assembly must be carried out by your
specialist workshop.
We supply the Shower and toiler wheelchair
dismantled in assembly groups. Assembly is
to be carried out as follows:
1. First insert the back tubes from the top
into the two rear frame parts [1] the
screw the handwheels in tightly (2) .
2. Mount the 24“ wheels with the axles
included within the scope of delivery
into the lowest hole of the receptacle
adapter [3].
☞
If required the receptacle block
can be placed toward the back by
screwing it into a different position.
This achieves a wheelbase exten-
sion.
3. Mount the pressure brakes with the
clamping bits on both sides to the
brake adjustment rail [4].
☞
Therefore observe chapter
4. Placing the seat cushion [5].
☞
☞
Upon demand place the insert
cushion into the recess (6).
5. The footboard can be folded forward
out of the frame.
6. Finally check for a secure fit of all con-
necting elements.
