background image

   33

WARRANTY / GUARANTEE

Failure to observe the instructions in the 
operating manual, improperly carried out 
maintenance work and, especially, tech-
nical changes and additions (add-ons) 
carried out without our prior consent will 
lead to a general loss of guarantee and 
product liability.

We accept legal liability for this product 
within the scope of or general terms and 
conditions and warranty and in certain cas-
es other verbal resp. agreed upon guaran-
tees. For warranty and guarantee demands 
please contact your specialist dealer with 
following Warranty/Guarantee section and 
the there included information on model 
description, delivery note number with de-
livery date and serial number (SN).
The serial number (SN) can be read off of 
the type plate.
Precondition for the acceptance of liability 
in any case is the intended use of the prod-
uct, the use of original spare parts by au-
thorised dealers as well as maintenance and 
inspections in regular intervals.
Guaranty is not granted for surface dam-
ages, tyres of the wheels, damages due to 
loosened screws or nuts as well as worn out 
attachment holes due to frequent assembly 
work.

Furthermore, damage to the drive and elec-
tronics caused by improper cleaning using 
steam cleaning equipment or the deliberate 
or accidental flooding of the components 
are also excluded.
Interferences through radiation sources 
such as mobile phones with high trans-
mission power, HiFi-equipment and other 
extreme interference radiators outside of 
norm specifications cannot be declared as 
warranty or guarantee claims.
This operating manual as a part of the prod-
uct is to be handed out in case of a change 
of owner.
For evaluation of our products you can use 
our < 

Infozentrum

 > sector < 

PMS

 > on our 

website < www.meyra.com >.
We reserve the right to make technical im-
provements.

This product is conform with the EC-Directive 93/42 EEC and fulfills the require-
ments of the from May 25th 2021 valid regulation (EU) 2017/745 for medical de-
vices.

Summary of Contents for 8013039





































Reviews: