13
FOOT PLATE
A footplate is available (fig. 8) that can
be adjusted in height, angle and depth
to the individual requirements of the
child.
Adjusting the height of the
foot plate
– Screw out the attachment screws
(fig. 9/
➀
) on both sides.
– Position the ellipse inserts (fig. 9/
➁
) on each side according to the
desired height.
– In doing so watch that the holes of
the ellipse inserts are flush with the
holes of the frame.
!
Attention:
Do not use the oval frame openings
(fig. 9/
➂
) for the attachment! – No
secure hold can be assured in this
position.
– Reinsert the attachment screws (fig.
9/
➀
) on each side from the inside
and tighten.
8
9
1
2
3
Summary of Contents for BRIX 1.123
Page 1: ...1 CHILDREN S WHEELCHAIRS BRIX Model 1 123 OPERATING MANUAL TheMotivation GB...
Page 2: ...2...
Page 40: ...40 NOTES...
Page 41: ...41 NOTES...
