14
10
1
Adjusting the angle of the
footplates
The footplate can be adjusted in ang-
le from +/- 10°.
– Unscrew the attachment screw (fig.
10/
➀
) on each side.
– Loosen the attachment screw (fig.
10/
➁
) on each side, but do not pull
them out.
– Press the footplate in to the desi-
red angle. – In doing so watch that
the corresponding holes are flush
with the holes of the frame.
– Reinsert the attachment screw (fig.
10/
➀
) on each side and tighten the
attachment screw (fig. 10/
➀
and
➁
) on each side.
Adjusting the depth of the
footplates
The footplate can be adjusted in depth
in five further positions in steps of 1
cm.
– Disassemble the screwed connec-
tion (fig. 10/
➂
) on each side.
– Reposition the footplate in depth
into the corresponding hole of the
footplate bracket.
– Reassemble the screwed connec-
tion (fig. 10/
➂
) on each side.
2
3
Summary of Contents for BRIX 1.123
Page 1: ...1 CHILDREN S WHEELCHAIRS BRIX Model 1 123 OPERATING MANUAL TheMotivation GB...
Page 2: ...2...
Page 40: ...40 NOTES...
Page 41: ...41 NOTES...
