18
Adjusting the seat depth
The seatbelt (fig. 14/
➀
) can be reposi-
tioned according to the length of the
thigh.
– Pull or lever the clamping piece
(fig. 17/
➀
or fig. 18/
➁
) out of the
seat tube on both sides, if necessa-
ry apply a screwdriver.
☞
Note:
Avoid damages to the coating.
– The quantity of clamping pieces
that are to be removed depends on
the desired skew.
☞
Note:
Make sure that the amount of clam-
ping pieces is the same on both si-
des.
– Slide the seatbelt to the desired
depth.
– Press the clamping pieces (fig. 17/
➀
or fig. 18/
➁
) from the top into
the seat tube.
Adjustment of seat width
!
Attention:
If an adjustment of the seat width
is necessary contact your specialist
dealer.
17
18
1
2
Summary of Contents for BRIX 1.123
Page 1: ...1 CHILDREN S WHEELCHAIRS BRIX Model 1 123 OPERATING MANUAL TheMotivation GB...
Page 2: ...2...
Page 40: ...40 NOTES...
Page 41: ...41 NOTES...
