20
21
1
2
3
20
22
Adjusting the backrest angle
The angle of the backrest (fig. 20) can
be adjusted from -6° to +9°.
The basic position of the backrest is
90° to the not angled seat surface.
– Unscrew the attachment screw (fig.
21/
➀
) on each side. – Hold onto
the nut (fig. 22/
➄
) with a combi-
nation wrench while doing so.
– Loosen the attachment screw (fig.
21/
➂
) on each side, but do not pull
them out.
– Position the ellipse insert (fig. 21/
➁
and fig. 22/
➃
) on each side ac-
cording to the desired angle.
– In doing so watch that the holes
of the ellipse inserts are flush with
the holes of the frame.
– Reattach the attachment screw (fig.
21/
➀
) on each side with the nut
(fig. 22/
➄
).
– Tighten the attachment screws (fig.
21/
➀
and
➂
) on each side.
5
4
Summary of Contents for BRIX 1.123
Page 1: ...1 CHILDREN S WHEELCHAIRS BRIX Model 1 123 OPERATING MANUAL TheMotivation GB...
Page 2: ...2...
Page 40: ...40 NOTES...
Page 41: ...41 NOTES...
