8
DRIVE WHEELS
+
Remark:
You will find the air pressure values
for the tyres for your wheelchair in
the Technical Specifications or the
information given for both sides of
the wheels.
Linchpin
The driving wheels can be removed and
re-assembled without any tools.
Benefits:
– Simple and quick loading away of
the wheelchair even in small cars.
– Quick and simple replacement of
driving wheels with different tyres.
Handling:
– Push in the stop button (A) in the cen-
tre of the wheel hub (Fig.30) and
– Remove or attach drive wheel.
!
Attention:
After installing the drive wheel, the
stop button must protrude a few
millimeters from the wheel nut. –
The driving wheel is secured in
position.
The stop bolt must be kept clean. A
functional fault may occur in the
case of contamination due to sand
or earth or in the event of freezing
of moist cold air.
Always carry out a tensile test after
each assembly!
WW* = Wrench width [mm]
SUPPORT HANDLE
The support handle offers additional sta-
bility and is inserted in the left or right
seat tube.
Before removing or inserting the support
handle, press in the spring button (A,
Fig. 26).
STABILISER/ANTI-
TIPPING WHEEL
The stabiliser wheel (Fig. 27 and 28)
can also be subsequently mounted. To
do this, precise data regarding wheel
size, wheel camber and seat width are
required.
Handling:
– Push in the stop button (A) at the cen-
tre of the fork and pull down the fork
with stabiliser wheel or insert from
above (Fig. 29).
